Use and Care

Thank you for purchasing our high-quality nano-fiber based noise baffling system. Our products are crafted with high-performance, weather-resistant, and mold and mildew-resistant materials, ensuring durability and longevity. To maximize the lifespan and maintain the appearance of your purchase, please follow these Use and Care Guidelines.

​​

Unboxing and Hanging Guidelines

1. When opening - Avoid cutting into box: Carefully open box and avoid cutting deep into seams of box as you risk cutting into enclosed products.

2. Do not drag panels on ground: Panels are designed to hang on fences and should not be dragged on the ground or courts. 

3. Do not over-tighten ties when hanging on fence: Ties should not be over-tightened on fences when attaching systems. Ties should be even with surface of panel but should not be forcibly tightened down as this can cause undo stress on grommets. 

4. Do not walk or step on panels: Panels should not be walked on or stepped on in anyway. 

​

Removal and Storage Guidelines

1. Avoid cutting ties off too close to fabric: Cut away from panel system when removing zip ties for storage. Remove zip tie from grommet with care. 

2. Use caution in removing ties from grommets: Use care and caution when removing used ties from system. Some ties may be an exact fit to grommet interior diameter. Be extremely careful when removing. 

3. Clean Before Storage: Ensure your product is clean and completely dry before storing it. This prevents mold, mildew, and unpleasant odors.

4. Avoid Folding: Store the product flat or loosely rolled to prevent creases that might weaken seams or fabric.

5. Cool, Dry Place: Store your product in a cool, dry place, away from direct sunlight, heat sources, and moisture.

6. Adverse Weather or Other Acts of Nature: In high wind events, adverse weather or other acts of nature, we strongly recommend storing the product to prevent damage. Additionally, store the product when courts are not in use.

 

Cleaning Instructions

1. Regular Cleaning: It is not necessary to clean the product after each use. For small stains, use a mild soap solution and a soft cloth or sponge. Avoid harsh detergents, bleach, and solvents as they can damage the fabric.

2. Deep Cleaning: Occasionally, the product may require a more thorough cleaning:

   • Set up or lay out the product on a clean surface.

   • Use a mild soap solution and a soft brush to scrub the fabric gently.

   • Rinse thoroughly with clean water.

   • Allow the product to air dry completely before storing it.

   • Do not use a pressure washer

Repair Instructions

1. Inspect Regularly: Frequently inspect your product for any signs of wear and tear, such as small holes or tears.

2. Patch Kit: In the event a tear or hole is found, SLN/CR will send patch kits to repair panel:

   • Clean the damaged area with a mild soap solution and let it dry.

   • Cut a patch from the repair kit that is slightly larger than the damaged area.

   • Apply the adhesive to the patch and place it over the tear or hole.

   • Press firmly and smooth out any air bubbles.

   • Allow the patch to set according to the adhesive's instructions before using the product again.

General Tips

1. Avoid Sharp Objects: Keep the product away from sharp objects and rough surfaces that can puncture or abrade the fabric. Do not drag, over stretch or force ties through grommets. Grommet interior dimensions are 7.9mm.

2. Ties will break away and will need to be replaced: We recommend zip ties with between 70lbs - 150lbs of  tensile strength with a maximum of 7mm in width. Common ties are 14' inches in length. For more recommendations on replacement ties, please contact hello@slncr.com

By following these Use and Care Guidelines, you will extend the life of your SLCNR product and ensure it performs optimally for years to come. Should you have any questions or need further assistance, please contact our customer service team at: 913-213-3591 or hello@slncr.com

​

Thank you for choosing SLCNR!