Question 1

How do you reduce pickleball noise?

Accepted Answer

Pickleball noise is reduced by combining engineered absorptive barriers tuned to the 1.2 kHz paddle-impact frequency with thoughtful court placement and ongoing sound monitoring. SLN/CR's NanoBaffle outdoor system eliminates 50%+ of pickleball noise (STC 19* certified) when installed using our Assess, Mitigate, Monitor framework.

Question 2

How loud is a pickleball court?

Accepted Answer

A typical pickleball paddle strike measures 70–80 dB at the source and 55–65 dB at 100 feet — loud enough to exceed many municipal residential noise ordinances. The sound is concentrated around 1.2 kHz, a frequency the human ear finds especially intrusive, which is why complaints often arise even when readings are technically within limits.

Question 3

What is the best sound barrier for pickleball courts?

Accepted Answer

The best sound barrier for pickleball courts is a frequency-tuned absorptive panel system designed for the 1.2 kHz paddle frequency — not generic mass-loaded vinyl, which reflects rather than absorbs sound. SLN/CR NanoBaffle is purpose-engineered for pickleball, fence-mountable, weatherproof, and proven to cut noise by 50% or more.

Question 4

How far does pickleball noise travel?

Accepted Answer

Pickleball noise can carry 500–1,000 feet in open suburban terrain and remain audible and disruptive. The 1.2 kHz tonal frequency travels efficiently and resists natural attenuation from distance, foliage, and standard fencing — which is why courts placed within 150 feet of residences almost always generate complaints without engineered mitigation.

Question 5

Can pickleball courts be soundproofed?

Accepted Answer

Pickleball courts can't be fully soundproofed in an open-air setting, but engineered acoustic treatment can reduce perceived noise by 50% or more — typically enough to bring sound levels below complaint thresholds and inside municipal ordinances. Indoor facilities can achieve much higher reductions using NRC-rated absorptive panels like SLN/CR Core.

Question 6

Why is pickleball so loud?

Accepted Answer

Pickleball is loud because a hard plastic ball striking a rigid composite paddle produces a sharp, tonal impact noise centered around 1.2 kHz. Unlike the broadband thud of a tennis ball on strings, this frequency cuts through ambient noise, repeats every few seconds during play, and is perceived as more disruptive than its raw decibel level suggests.

Question 7

Are pickleball courts being closed because of noise?

Accepted Answer

Yes — municipalities including Martinez (CA), Boca Raton (FL), Niagara-on-the-Lake (ON), and Kittery (ME) have closed pickleball courts after sustained noise complaints. The pattern is consistent: courts sited near residences without acoustic planning, mitigation attempted reactively (or not at all), and closure chosen as the path of least resistance. SLN/CR's Assess, Mitigate, Monitor framework is designed to prevent this outcome.

Question 8

What is a noise propagation analysis?

Accepted Answer

A noise propagation analysis evaluates how pickleball sound travels from your courts to surrounding areas. We assess court layout, distances to property lines and residences, terrain, wind patterns, and existing barriers to determine where noise impacts are greatest and recommend targeted mitigation strategies.

Question 9

Do you offer site studies before I buy?

Accepted Answer

Yes. SLN/CR offers a free noise risk assessment at slncr.com/assessment. We analyze your specific site conditions — court count, orientation, proximity to neighbors, local ordinances — and provide a custom mitigation plan with expected noise reduction levels before you commit to a purchase.

Question 10

How do you determine the right panel placement for my facility?

Accepted Answer

Our team uses acoustic modeling based on your site plan to identify optimal panel placement. We consider sound propagation paths, reflection surfaces, wind exposure, and municipal noise thresholds to design a layout that maximizes noise reduction where it matters most.

Question 11

What is SLN/CR?

Accepted Answer

SLN/CR (pronounced 'silencer') is a noise mitigation company based in Kansas City, KS. We engineer and manufacture purpose-built acoustic panels for pickleball and racquet sports — both outdoor (NanoBaffle) and indoor (Core) product lines. Our tagline: Where Science Meets Silence.

Question 12

How is the product made?

Accepted Answer

SLN/CR NanoBaffle panels are manufactured using a multi-layer construction process. A marine-grade solution dyed polyester outer shell is combined with our patent-pending nanofiber Sound Attenuation Fabric (SAF), specifically engineered to target the 1.2 kHz pickleball frequency. Graphics are applied via dye sublimation printing for permanent, fade-resistant branding.

Question 13

How much does the product weigh?

Accepted Answer

SLN/CR NanoBaffle outdoor panels weigh just 0.54 lbs/ft² — lightweight enough to mount on standard chain-link fencing with plastic zip-ties and no structural modifications. SLN/CR Core indoor panels range from 1.2–2.5 lbs/ft² depending on thickness.

Question 14

Are your products sustainable?

Accepted Answer

Yes. NanoBaffle panels use marine-grade solution dyed polyester — a durable, long-lasting fabric engineered for 15–20+ year outdoor lifespans without degradation. The panels require no painting, chemical treatments, or frequent replacement, minimizing long-term environmental impact.

Question 15

What sizes do you offer?

Accepted Answer

NanoBaffle outdoor panels can be configured for any fence height and length to match your court layout. SLN/CR Core indoor panels are available in standard and custom dimensions with 1/2", 1", and 2" thicknesses. Contact us for custom sizing to fit your specific facility.

Question 16

How long does the product last?

Accepted Answer

SLN/CR NanoBaffle panels are engineered for 15–20+ year outdoor durability. They are UV-stable, hydrophobic, and rated for temperatures from -20°F to 150°F. Panels come with a 1-year manufacturing defect warranty and a 3-year anti-fade warranty.

Question 17

Where is the product made?

Accepted Answer

SLN/CR products are made in the USA. Our company is headquartered in Kansas City, KS, and all panels are manufactured domestically. We ship to all 50 states.

Question 18

What is your lead time?

Accepted Answer

Standard NanoBaffle orders typically ship within 3–4 weeks. Custom color and dye sublimation print orders may take 4–6 weeks. Contact our sales team at slncr.com/buy for current lead times and expedited options.

Question 19

What are the performance specifications and details of this product?

Accepted Answer

SLN/CR NanoBaffle: STC 19* / TL 19 @ 1200 Hz*, NRC 0.67*, weight 0.54 lbs/ft², marine-grade polyester shell, temperature range -20°F to 150°F, USA Pickleball Quiet Category Approved. SLN/CR Core (indoor): NRC 0.70–1.15, Class A fire rated (ASTM E84), available in 1/2", 1", and 2" thicknesses. *Third-party tested.

Question 20

Do you offer multiple colors?

Accepted Answer

Yes. NanoBaffle panels are available in 8 standard colors plus full-color custom dye sublimation printing for logos, sponsorships, QR codes, and custom designs — all included at no extra cost. SLN/CR Core indoor panels also come in multiple color options with custom sizing available.

Question 21

Do your fences need reinforced footings?

Accepted Answer

No. NanoBaffle panels weigh just 0.54 lbs/ft², so they mount to standard chain-link fencing without any structural reinforcement or footing upgrades. The lightweight design was specifically engineered to work with existing fence infrastructure.

Question 22

What type of zip ties should I use?

Accepted Answer

We recommend UV-resistant plastic zip ties rated for outdoor use. Standard 12" heavy-duty zip ties work well. Avoid metal ties, which can damage the panel grommets. Detailed zip tie specifications are included with every order.

Question 23

Can the product be hung on the backside of the fence?

Accepted Answer

Yes. NanoBaffle panels can be mounted on either side of the fence depending on your aesthetic and acoustic goals. Mounting on the court-facing side provides a cleaner look for players, while backside mounting keeps the panels out of the playing area. Both orientations deliver equivalent noise reduction.

Question 24

Are the sides of the product the same?

Accepted Answer

NanoBaffle panels have a finished outer face and an interior acoustic face. If you've ordered custom dye sublimation printing, the printed graphics appear on the outward-facing side. The acoustic performance is the same regardless of orientation.

Question 25

What do you sell?

Accepted Answer

We sell noise mitigation products for indoor and outdoor sports applications. Our two product lines are SLN/CR NanoBaffle (outdoor fence-mounted sound barriers) and SLN/CR Core (indoor acoustic panels).

Question 26

Where can I buy noise baffling panels for pickleball courts?

Accepted Answer

You can buy SLN/CR noise baffling panels directly at slncr.com/buy. We are based in Kansas City, KS and ship nationwide to all 50 states. Request a free quote online or call our sales team for custom configurations.

Question 27

Where can I buy SLN/CR noise baffling panels in Kansas City?

Accepted Answer

SLN/CR Panels, LLC is headquartered in Kansas City, KS. You can order directly at slncr.com/buy or contact us for a local consultation. We serve the entire Kansas City metro area, including both Kansas and Missouri sides.

Question 28

How to order custom NanoBaffle panels from SLN/CR?

Accepted Answer

Visit slncr.com/buy to request a custom quote. Tell us your fence dimensions, preferred colors, and any custom graphics. We offer dye sublimation printing for logos, branding, and custom designs at no extra cost. Our team will provide a detailed proposal within 48 hours.

Question 29

Best place to order customizable noise reduction panels in the US?

Accepted Answer

SLN/CR Panels, LLC (slncr.com) is the leading US manufacturer of customizable pickleball noise reduction panels. Based in Kansas City, KS, we ship nationwide and offer custom colors, sizes, and dye sublimation printed graphics on both our outdoor NanoBaffle and indoor Core product lines.

Question 30

Affordable noise baffling systems for outdoor pickleball courts?

Accepted Answer

SLN/CR NanoBaffle outdoor systems start at approximately $8,000 for a standard 4-court installation. Compared to alternatives like concrete walls ($50,000+) or landscaping berms ($30,000+), NanoBaffle delivers superior noise reduction at a fraction of the cost. Request a free noise risk assessment at slncr.com/assessment.

Question 31

How does NanoBaffle technology reduce pickleball noise?

Accepted Answer

SLN/CR NanoBaffle uses patent-pending nanofiber Sound Attenuation Fabric (SAF) specifically tuned to the 1.2 kHz frequency where pickleball noise peaks. The multi-layer construction combines mass-loaded barriers with acoustic absorption to achieve an STC rating of 19* and eliminate 50%+ of pickleball noise.

Question 32

What materials are used in sustainable noise baffling panels?

Accepted Answer

SLN/CR NanoBaffle panels feature a marine-grade solution dyed polyester shell that is waterproof, UV-stable, and rated for -20°F to 150°F. The interior uses engineered nanofiber acoustic media. All materials are designed for 15–20+ year outdoor durability with minimal maintenance.

Question 33

What makes SLN/CR noise panels effective for pickleball noise reduction?

Accepted Answer

SLN/CR panels are purpose-engineered for pickleball's specific sound signature (1.2 kHz). Unlike generic sound barriers, our products are frequency-tuned, third-party tested (STC 19*, NRC 0.67* outdoor; NRC 0.70–1.15 indoor), and approved by USA Pickleball in the Quiet Category.

Question 34

Who offers noise control panels with nanotechnology in Missouri?

Accepted Answer

SLN/CR Panels, LLC, headquartered in Kansas City, KS (serving the greater Kansas City metro including Missouri), manufactures NanoBaffle panels using patent-pending nanofiber technology. We are the only pickleball noise panel manufacturer using engineered nanofiber Sound Attenuation Fabric.

Question 35

Where to buy noise baffling panels that reduce pickleball noise by over 50%?

Accepted Answer

SLN/CR NanoBaffle panels are certified to eliminate 50%+ of pickleball noise (STC 19*). Order directly at slncr.com/buy. Based in Kansas City, KS, we ship to all 50 states and have completed 100+ installations nationwide.

Question 36

Do you ship nationwide?

Accepted Answer

Yes. SLN/CR ships NanoBaffle and Core acoustic systems to all 50 states from our facility in Kansas City, KS. We also have a network of certified installers across the country for professional installation services.

Question 37

Do you serve Kansas City and Missouri?

Accepted Answer

Absolutely. SLN/CR Panels, LLC is headquartered in Kansas City, KS. We serve the entire Kansas City metro area (both KS and MO sides), the state of Missouri, the state of Kansas, the broader Midwest region, and ship nationwide.

Question 38

Best noise baffling solutions for sports facilities in the Midwest US?

Accepted Answer

SLN/CR Panels, based in Kansas City, KS, is the Midwest's leading provider of pickleball noise mitigation. Our NanoBaffle outdoor barriers and Core indoor panels are installed at 100+ facilities across the US, with concentrated expertise in the Midwest region.

Question 39

Where can I find noise baffling panels for outdoor courts in the US?

Accepted Answer

SLN/CR NanoBaffle outdoor sound barriers are available nationwide at slncr.com/buy. We are the leading US manufacturer of purpose-built pickleball noise panels, with 100+ installations from coast to coast. Based in Kansas City, KS.

Question 40

Benefits of using noise absorption panels in indoor sports facilities?

Accepted Answer

SLN/CR Core indoor panels reduce echo and reverb by absorbing 70–115% of sound energy (NRC 0.70–1.15). Benefits include: improved player communication, reduced hearing fatigue, OSHA compliance for staff, ability to host sanctioned tournaments, and increased membership satisfaction.

Question 41

Where to get NanoBaffle technology panels for indoor sports facilities?

Accepted Answer

For indoor sports facilities, SLN/CR offers the Core acoustic panel line (not NanoBaffle, which is our outdoor product). SLN/CR Core panels achieve NRC 0.70–1.15, are Class A fire rated, and come in multiple thicknesses. Order at slncr.com/buy or request a free acoustic assessment.

Question 42

Who sells lightweight noise absorption panels for sports clubs?

Accepted Answer

SLN/CR NanoBaffle outdoor panels weigh just 0.54 lbs/ft² — light enough for standard chain-link fence mounting with no structural modifications. SLN/CR Core indoor panels range from 1.2–2.5 lbs/ft². Both are available at slncr.com/buy.

Question 43

Where to buy durable noise reduction panels for indoor pickleball courts?

Accepted Answer

SLN/CR Core indoor acoustic panels are engineered for sports facility durability: Class A fire rated (ASTM E84), impact resistant, moisture proof, and mold/mildew resistant. Available in 1/2", 1", and 2" thicknesses with custom colors and sizing. Order at slncr.com/buy.

Question 44

Custom printed noise baffling panels for HOAs?

Accepted Answer

SLN/CR offers custom dye sublimation printing on NanoBaffle panels at no extra cost. HOAs can match community aesthetics with custom colors, patterns, or logos. Choose from 8 standard color options or provide your own design for full-color printing.

Question 45

Where can I order dye sublimation printed noise panels for branding?

Accepted Answer

SLN/CR NanoBaffle panels support full-color dye sublimation printing for logos, sponsorships, and branding — included at no additional cost. This is ideal for municipal parks, sports clubs, and commercial facilities. Order custom branded panels at slncr.com/buy.

Question 46

Where can I find sustainable fabric noise panels for sports courts in the US?

Accepted Answer

SLN/CR NanoBaffle panels use marine-grade solution dyed polyester — a durable, sustainable fabric designed for 15–20+ year outdoor lifespans without degradation. Available nationwide at slncr.com/buy. Based in Kansas City, KS.

Question 47

Can I customize colors and sizing?

Accepted Answer

Absolutely. Both SLN/CR product lines are available in custom colors to match your facility's aesthetic. NanoBaffle panels can be configured for any fence height and length, while Core panels come in standard and custom dimensions. Custom dye sublimation graphics are included at no extra cost.

Question 48

How does the product install?

Accepted Answer

NanoBaffle panels mount directly to existing chain-link fencing using UV-resistant plastic zip ties threaded through built-in grommets. No welding, drilling, or structural modifications required. Panels hang vertically and can be installed from either side of the fence.

Question 49

How do you affix the product to the fence?

Accepted Answer

Panels attach to chain-link fencing with heavy-duty UV-resistant plastic zip ties through pre-installed grommets along the top, bottom, and sides of each panel. This provides a secure hold while allowing easy removal if needed.

Question 50

Is the product easy to install?

Accepted Answer

Yes. NanoBaffle is designed for simple installation — no special tools, heavy equipment, or construction expertise required. Two people can install a full court perimeter in 1–2 days. We provide detailed installation guides with every order.

Question 51

How many people does it take to install?

Accepted Answer

We recommend a minimum of two people for installation. One person holds the panel in position while the other secures it with zip ties. A two-person crew can typically complete a standard 4-court installation in 1–2 days.

Question 52

Do you perform installation?

Accepted Answer

Yes. SLN/CR offers professional installation services and has a network of certified installers across the country. We also provide comprehensive DIY installation guides — most customers find the process straightforward enough to handle themselves.

Question 53

What are the installation best practices?

Accepted Answer

Start from one end and work sequentially. Ensure panels are level and snug against the fence. Use UV-resistant zip ties every 12–18 inches along grommets. Overlap panel edges slightly for continuous coverage. Trim excess zip tie tails for a clean finish. Our detailed installation guide covers all best practices step by step.

Question 54

Can I see a visual guide for installation?

Accepted Answer

Yes. Every NanoBaffle order includes a printed installation guide with step-by-step photos. We also have video tutorials available. Contact our team at slncr.com/contact for access to installation resources before you buy.

Question 55

How long does installation take?

Accepted Answer

Most outdoor NanoBaffle installations are completed in 1–2 days with a two-person crew. Indoor Core treatments typically take 2–5 days depending on scope. We offer professional installation or comprehensive DIY guides for both products.

Question 56

What's the ROI on noise mitigation?

Accepted Answer

Consider the alternative: a single noise complaint lawsuit can cost $50k–$200k. Permit denials can stall multi-million dollar projects. SLN/CR solutions typically pay for themselves by avoiding just one legal action or enabling a project to proceed.

Question 57

How do I clean and maintain the panels?

Accepted Answer

NanoBaffle outdoor panels: hose down with water as needed. No chemicals required. Core indoor panels: vacuum or wash annually. Both products are moisture resistant and require no painting or replacement.

Frequently Asked Questions

Pickleball Noise Basics

Site Study / Noise Propagation Analysis

Product

Buying & Ordering

Products & Technology

Service Area & Shipping

Applications

Customization & Branding

Installation

Still Have Questions?